LightShield LED Therapy Mask

• 5 wavelengths, not 2 — most budget masks only run red (630nm) and near-infrared. This one adds blue (415nm) for bacteria, yellow (590nm) for redness/tone, and deep infrared (1072nm) for tissue below the surface
• 90 LEDs, evenly split — no hot spots or gaps between panels
• Built-in eye shield — molded into the mask design, so there's no separate goggles to attach
• 6 programmed modes, each with its own preset time (not a single "on" button):
• Red light only — 10 min
• Yellow + Red — 10 min
• Red + Infrared — 10 min
• Yellow + Red + Infrared — 10 min
• Blue only — 10 min
• Overnight blend: Yellow (2 min) → Red/Infrared (5 min) → Blue (3 min) — 10 min total
• 3 brightness settings (50% / 75% / 100%) plus a 10Hz pulse option on any mode
• Irradiance of 30–40 mW/cm² — the actual output strength, not just an LED count
• USB-C charging — same cable as your phone, no proprietary charger to keep track of
• Comes with: strap, controller, Type-C cable, carrying pouch, and printed manual

1. Cleanse your face and pat dry — the light works best on bare skin.
2. Put on the mask and adjust the strap for a comfortable fit.
3. Turn it on and pick a mode based on what your skin needs that day (acne, redness, firming, etc.).
4. Choose your brightness level — 50%, 75%, or 100% — and turn on pulse mode if you want a deeper boost.
5. Relax for the session (about 10 minutes). It shuts off automatically when done.
6. Apply your moisturizer or serum right after to lock in the benefits.
7. Use 3–5 times a week for the best results — daily use isn't necessary.

Avoid use if you're pregnant, on photosensitizing medication, or have a light sensitivity condition — check with a doctor first.