قناع سيليكون للعلاج بالضوء الأحمر

Dhs. 599.00

Acne & breakouts

Fine lines & aging

Redness & uneven texture

Poor circulation / dull skin

Most red light masks stop at the surface. This one doesn't. The Red Light Therapy Silicon Mask uses VCSEL laser technology which is the same high-energy diodes used in professional clinics, to push light deeper into skin than standard LEDs ever could, with a boosted 1072nm wavelength that reaches where fine lines and collagen loss actually start. 

One VCSEL chip puts out the strength of three regular LEDs, so you're not just wearing a mask. You're running a stronger, more clinical-grade session, at home, in the time it takes to watch an episode of something.

قناع سيليكون للعلاج بالضوء الأحمر

6 Modes + 3 Brightness Levels Adjustment + Pulse Function

Restoration- Whitening - Anti Aging - Deep Repair - Acne Care- Bedtime Care

Blue (415nm)
Red (660nm)
Yellow (590nm)
Near-InfraredNIR (850nm)

Treats:

Targeting Acne

Collagen Production

Brightens Skin

Kills Bacteria

Cell Regeneration

One-time purchase

$61.25

Split into 4 payments from Dhs. 149.75 AED each, with

or

Choose Tabby or Tamara at checkout.

What Makes It Different

VCSEL Technology, Not Basic LEDs 

Most budget masks only run red (630nm) and near-infrared. This one adds blue (415nm) for bacteria, yellow (590nm) for redness/tone, and deep infrared (1072nm) for tissue below the surface

3X the Energy, Same Mask 

No hot spots or gaps between panels

Flexible & Travel-Friendly

Made from soft, flexible silicone that easily folds and fits into your bag, making it perfect for skincare on the go. 

Clinical-Strength Irradiance 

  • 35mW/cm² output — 100% more energy than standard masks on the market.

6+3+1 Skincare mode

 

SoliqLabs exclusive Led, Safeguard your skincare, 10HZ pulse penetrates deep into the dermis

USB-C charging 

  • Simple Smart Controller Clean LED display with one-touch power, timer, and brightness controls — no guesswork.

How to Use

Step 1 — 

Cleanse your face and pat dry before starting.

Step 2 —

Put on the mask and secure it comfortably.

Step 3 —

Power on using the controller's power button.

Step 4 —

Set your timer using the T button (choose your session length).

  1. Adjust brightness with the E button to your comfort level.
  2. Relax for the session — the display shows time remaining and mode.
  3. Moisturize after to help lock in results.
  4. Use daily for gradual, visible improvement in tone, texture, and fine lines.

Step 5 —

Adjust brightness with the E button to your comfort level.

  1. Relax for the session — the display shows time remaining and mode.
  2. Moisturize after to help lock in results.
  3. Use daily for gradual, visible improvement in tone, texture, and fine lines.

Step 6 —

Relax for the session — the display shows time remaining and mode.

Step 7 —

Moisturize after to help lock in results.

Step 8 —

Use 3–5 times a week for the best results — daily use isn't necessary.

What's Included

LED Face Silicon Mask

Charging cable

Eye Protection

Controller

User manual

Technical specifications

LED Colors

Blue, Orange, Red, NIR

Wavelengths:

415/590/630/850/1072nm

Wavelengths:

415/590/630/850/1072nm

LEDs: 

LEDs: 90 pcs

Power: 6W

Dimensions:  

Charging: USB-C, 5V 2A/1A input

Battery Capacity: DC 5V (3000mAh)

Pulsing: 10Hz

Modes: 6 skin care modes + brightness/pulse adjustment

90 pcs

Power: 

6W

Dimensions: 

345×225×181mm

Charging: 

USB-C, 5V 2A/1A input

Battery Capacity: 

5000mAh

Pulsing: 

10Hz

Modes: 

6 skin care modes + brightness/pulse adjustment

FAQ's

What is an LED light therapy mask?

An LED light therapy mask uses specific wavelengths of light to support the appearance and overall condition of your skin. Different light colours are designed to target different skincare needs.

How often should I use the LED mask?

For best results, use the mask consistently according to the recommended treatment schedule in the product instructions. Avoid exceeding the recommended session time.

How long should each session last?

A typical session is around 10–20 minutes, depending on the selected mode and product instructions.

Can I use the mask every day?

Follow the recommended usage instructions for your specific mask. If your skin is sensitive, start with shorter or less frequent sessions and increase gradually if comfortable.

Is LED light therapy painful?

LED light therapy is generally designed to be a gentle, non-invasive skincare treatment. You should not experience pain during normal use.

Does the mask contain UV light?

No. LED skincare masks are designed to use visible and/or near-infrared wavelengths rather than UV light.

Can I use the mask with my skincare products?

The mask is generally best used on clean, dry skin. If you use skincare products before treatment, check their instructions and avoid products that may increase light sensitivity unless advised otherwise.

Can I use the mask if I have sensitive skin?

LED therapy is generally gentle, but individual skin can react differently. Start with a shorter session and discontinue use if you experience persistent irritation or discomfort.

Can I wear the mask while doing other activities?

The mask is designed for convenient at-home use. For safety and comfortavoid driving, operating machinery, or activities that require clear vision, balance, or full attention.

When will I see results?

Results vary depending on your skin and how consistently you use the mask. LED therapy is intended to be part of a regular skincare routine rather than a one-time treatment.

How should I clean the mask?

After use, gently clean the mask according to the product's care instructions. Keep the device dry unless it is specifically designed to be water-resistant.

Is the LED mask suitable for all skin types?

LED masks are generally designed for a wide range of skin types, but certain medical conditions, medications, or photosensitivity may make LED treatment unsuitable. If you are unsure, consult a healthcare professional before use.

Acne & breakouts

Fine lines & aging

Redness & uneven texture

Poor circulation / dull skin

Soliq Labs LightShield LED Therapy Mask brings professional-grade red light therapy home. Featuring 5 clinically proven wavelengths and 90 medical-grade LEDs, this all-in-one mask targets acne, redness, fine lines, and skin firmness — all in a single, comfortable, no-assembly design with built-in eye protection.

Unlike standard LED masks that require separate eye shields, the LightShield's integrated face-and-eye design blocks 100% of light leakage, so you get full-coverage treatment without added parts or setup.

the led difference: 
benefits that build over time

Give your skin the power of light — consistently.
See and feel your skin become smoother, brighter, and more refreshed with regular use.

Advanced Skin Repair

  • Supports the skin’s natural repair process
  • Helps restore tired, stressed-looking skin
  • Promotes a healthier-looking complexion

Redness & Skin Calming

  • Helps soothe the appearance of redness
  • Supports calmer-looking skin
  • Helps reduce the look of skin irritation

Texture & Elasticity Support

  • Helps improve the appearance of uneven texture
  • Supports smoother, more elastic-looking skin
  • Helps skin look firmer and more refined

Cellular Skin Support

  • Supports healthy-looking skin at a deeper level
  • Helps revitalize tired-looking skin
  • Promotes a refreshed, renewed appearance

How to use:

Start with clean, dry skin and select your preferred light colour.
Use for 10–20 minutes per session, consistently as part of your skincare routine for best results.

a smarter way to care for your skin

No UV

No Needles

No Downtime

Non-Invasive

Skin-Friendly

Targeted Light

No Harsh Chemicals

No Synthetic Dyes

Clinically Studied Wavelengths 

Customer reviews

–
Loading reviews…